Features:

• It is widely used and the most popular product in the gravity roller series. It is commonly used in carton conveying applications.
• The bearing end cap consists of a precision ball bearing, a polymer housing and end cap seal. Combined they provide an attractive, smooth and quite running roller.
• The design of the end cap protects the bearings by providing excellent resistance to dust and splashed water.
• Can be configured with different bearings according to the application. Meets the requirements for light gravity chutes.
• Suitable for high speed applications. Maximum speed varies with roller length and diameter. Maximum speed up to 120m/min.
• Anti-static configuration available.
• Temperature range: -5^oC ~ +40^oC.

Features:

• The precision ball bearing is secured in the steel stamped bearing housing. The bearing is tight and durable. Able to withstand greater axial forces than a plastic bearing unit.
• The environmental working conditions are broad. They can be used in both high and low temperature applications.
• Complete range of tube diameters available. High load capacity. Anti-static design.
• Temperature range: -20^oC ~ +80^oC.

Features:

• Very light, smooth running. Suitable for light duty conveying.
• Utilizes polymer ball bearings. The inner/outer flange of the bearing is made of POM. The ball is made of stainless steel.
• PVC tube with good chemical stability.
• Higher noise levels compared with other series rollers.
• Temperature range: -5^oC ~ +40^oC.

Features:

• Based on the 1200 Series, fitted with a grey polypropylene taper sleeve; abrasion resistant, low noise, shockproof.
• The bearing end cap consists of a precision ball bearing, a polymer housing and end cap seal. Combined they provide an attractive, smooth and quite running roller.
• The design of the end cap protects the bearings by providing excellent resistance to dust and splashed water.
• The roller is light, easy to start-up.
• Temperature range: -5^oC ~ +40^oC.

Features:

• Based on the 2240 Series, fitted with a grey polypropylene taper sleeve; abrasion resistant, low noise, shockproof.
• The bearing end cap consists of a precision ball bearing, a polymer housing and end cap seal. Combined they provide an attractive, smooth and quite running roller.
• The design of the end cap protects the bearings by providing excellent resistance to dust and splashed water.
• The roller is light, easy to start-up.
• The position of the grooves can be customised.
• The load capacity of the roller depends upon the drive capacity of the O-belt.
• The weight of single items should not exceed 30kg.
• Temperature range: -5^oC ~ +40^oC.

Features:

• Based on the 2250 Series, fitted with a grey polypropylene taper sleeve; abrasion resistant, low noise, shockproof.
• The poly-vee pulley is located at the end of the roller which separates the drive area and the conveying area making the conveying smooth, high speed and low noise.
• The bearing end cap consists of a precision ball bearing, a polymer housing and end cap seal. Combined they provide an attractive, smooth and quite running roller.
• The design of the end cap protects the bearings by providing excellent resistance to dust and splashed water.
• ISO9982 PJ series poly-vee. Total of 9 grooves at 2.34mm pitch.
• Various PJ belt lengths available to suit different pitch of rollers.
• Suitable for high speed applications. Maximum speed varies with roller length and diameter. Maximum speed up to 120m/min.
• Temperature range: -5^oC ~ +40^oC.

Features:

• Welding the steel sprocket to the tapered steel tube gives it the capacity to transmit high torque making it suitable for medium/heavy duty loads.
• The environmental working conditions are broad. They can be used in both high and low temperature applications.
• The design of the end cap protects the bearings by providing excellent resistance to dust and splashed water.
• The taper can be customized (standard 3.6°).
• Narrow tooth sprockets are used to provide smooth roller rotation.
• The weight of single items to be conveyed should not exceed 200kg.
• Temperature range: -10^oC ~ +80^oC.

Features:

• Based on the 2260 Series, fitted with a grey polypropylene taper sleeve; abrasion resistant, low noise, shockproof.
• The O-belt pulley is located the end of the roller which separates the drive area and the conveying area avoiding interference between the O-belt and the conveyed goods.
• The bearing end cap consists of a precision ball bearing, a polymer housing and end cap seal. Combined they provide an attractive, smooth and quite running roller.
• The design of the end cap protects the bearings by providing excellent resistance to dust and splashed water.
• Because there is no grooving of the tube, the tube will not have any distortion and the roller will run more smoothly.
• The load capacity of the roller depends upon the drive capacity of the O-belt.
• The weight of single items should not exceed 30kg.
• Temperature range: -5^oC ~ +40^oC.

Features:

• The O-belt pulley is located the end of the roller which separates the drive area and the conveying area avoiding interference between the O-belt and the conveyed goods.
• The bearing end cap consists of a precision ball bearing, a polymer housing and end cap seal. Combined they provide an attractive, smooth and quite running roller.
• The design of the end cap protects the bearings by providing excellent resistance to dust and splashed water.
• Because there is no grooving of the tube, the tube will not have any distortion and the roller will run more smoothly.
• Temperature range: -5^oC ~ +40^oC.

Features:

• The poly-vee pulley is located at the end of the roller which separates the drive area and the conveying area making the conveying smooth, high speed and low noise.
• The bearing end cap consists of a precision ball bearing, a polymer housing and end cap seal. Combined they provide an attractive, smooth and quite running roller.
• The design of the end cap protects the bearings by providing excellent resistance to dust and splashed water.
• ISO9982 PJ series poly-vee. Total of 9 grooves at 2.34mm pitch.
• Optional steel drive head available.
• Various PJ belt lengths available to suit different pitch of rollers.
• Suitable for high speed applications. Maximum speed varies with roller length and diameter. Maximum speed up to 120m/min.
• Temperature range: -5^oC ~ +40^oC.

Features:

• Using the polyamide sprocket roller as the drive element greatly reduces the running noise.
• The bearing end cap consists of a precision ball bearing, a polymer housing and end cap seal. Combined they provide an attractive, smooth and quite running roller.
• The design of the end cap protects the bearings by providing excellent resistance to dust and splashed water.
• The weight of the goods to be conveyed should not exceed 150kg.
• Temperature range: -5^oC ~ +40^oC.

Features:

• Welding the steel sprocket to the steel tube gives it the capacity to transmit high torque and meet the requirements for heavy duty transportation.
• The bearing end cap consists of a precision ball bearing, a polymer housing and end cap seal. Combined they provide an attractive, smooth and quite running roller.
• The design of the end cap protects the bearings by providing excellent resistance to dust and splashed water.
• Temperature range: -5^oC ~ +40^oC.

Features:

• Welding the steel sprocket to the steel tube gives it the capacity to transmit high torque and meet the requirements for heavy duty transportation.
• The precision ball bearing is pressed tightly into the steel bearing housing for maximum durability.
• The environmental working conditions are broad. They can be used in both high and low temperature applications.
• The covering on the outside of the sprocket protects the bearings by providing excellent resistance to dust and splashed water.
• Temperature range: -20^oC ~ +80^oC.

Steel Flange (Welded Type)

1. Forms a pathway for the product being conveyed.
2. Steel flange and tube are welded together making it strong and durable.
3. Suitable for zinc plated steel tube only.

Aluminium Flange (Clamp Type)

1. Aluminum flange is clamped onto the tube with bolts. Suitable for medium duty.
2. Flange position is adjustable according to the size of the goods.
3. Suitable for stainless steel tube and hard chrome plated pipe.

 Features:

• CE certified to UL standards.
• Tube material: Mild steel, zinc plating / Stainless steel (SUS304).
• Roller diameter: 60.5mm, 76.3mm.
• Min. tube length: 450mm.
• Max. tube length: 1,800mm.
• Cable length: 500mm (Pallet). 900mm (Pallet-Ai). *Contact us for extension cables.
• Motor connector: JST (Pallet). M8 – 4 pin (Pallet-Ai).
• Operation: 1.0 sec ON / 1.0 sec OFF duty cycle (Minimum) or continuous within rated load.
• Compatible control technology:

Pallet – EZQube, Conveylinx

Pallet Ai – Conveylinx Ai2, MotionLinx Ai

Features:

• CE certified, RoHS compliant, IP54 rating.
• ETL Certified to UL Standards.
• Mounting: M5 x 7mm.
• Shaft diameter: 16mm.
• Key: 5 x 5 x 25mm.
• Cable length: 600mm (SENERGY motor), 1,000mm (SENERGY-Ai motor).
• *Contact us for extension cables.
• Motor connector: JST (SENERGY motor), M8 – 4 pin (SENERGY-Ai motor).
• Operation: 0.5 sec ON / 0.5 sec OFF duty cycle (Minimum) or continuous within rated load.
• Compatible control technology:

PGD – EQube, EZQube, IQZonz, Conveylinx

PGD Ai – EQube Ai, Conveylinx Ai2, MotionLinx Ai

Features:

• The accumulation force can be adjusted with high flexibility by the nut at the end of the roller.
• The precision ball bearing is pressed tightly into the steel bearing housing for maximum durability.
• The friction housing is made of special material which greatly improves its abrasion resistance and lifespan.
• Suitable for conveying weight 10 – 80kg.
• Temperature range: -5^oC ~ +80^oC.